How to count music in 8-counts for choreography
Counting in eights is the shared language between choreographer and dancers. Once you know where the 1 lands and how long each 8 lasts, you can plan formations and transitions that always hit the music.
Beats, bars and eights
A count is each pulse of the song: what you tap with your foot. Dancers count in groups of 8 ("1, 2, 3… 8") because most popular music is in 4/4 and musical phrases last 8 counts or multiples of 8.
What BPM is and how long an 8-count lasts
BPM (beats per minute) is the tempo. It tells you how long everything lasts: one count = 60 ÷ BPM seconds and one 8-count = 480 ÷ BPM seconds.
| BPM | One count | One 8-count | Four 8-counts (section) |
|---|---|---|---|
| 90 | 0.67 s | 5.33 s | 21.3 s |
| 100 | 0.60 s | 4.80 s | 19.2 s |
| 107 | 0.56 s | 4.49 s | 17.9 s |
| 115 | 0.52 s | 4.17 s | 16.7 s |
| 120 | 0.50 s | 4.00 s | 16.0 s |
| 128 | 0.47 s | 3.75 s | 15.0 s |
| 140 | 0.43 s | 3.43 s | 13.7 s |
Example: at 107 BPM an 8-count lasts 4.49 seconds, so a four-eight chorus lasts about 18 seconds.
How to find the 1
- Find the strong hit. The 1 usually lines up with the heaviest kick drum or with the moment the drums come in.
- Listen for changes. Sections (verse, chorus) almost always start on a 1. If you count eights and the chorus starts on your 3, the 1 was earlier.
- Watch out for intros. Many songs start without drums (vocals, piano). Count from where the beat comes in and then ‘walk back’ in eights to the start.
- Pickups. Sometimes the vocal comes in on 7 or 8 before the 1: that's not the 1, it's the pickup.
How a song is organized
Most songs are built in blocks of eight: intro (2-4 eights), verse (4), pre-chorus (2-4), chorus (4), repeat, with a calmer bridge near the end. That tells you where to change formations: big changes at the start of a section, and in choruses, every 8. Formation ideas in 16 dance formations for groups.
Example: a song mapped in eights
A pop song at 107 BPM with the first 1 at 0.4 seconds. Each eight lasts 4.49 s, so adding up eights tells you where every section starts:
| Section | Eights | Starts | Lasts |
|---|---|---|---|
| Intro | 2 | 0:00.4 | 9.0 s |
| Verse 1 | 4 | 0:09.4 | 17.9 s |
| Pre-chorus | 2 | 0:27.3 | 9.0 s |
| Chorus | 4 | 0:36.3 | 17.9 s |
| Verse 2 | 4 | 0:54.2 | 17.9 s |
| Pre-chorus | 2 | 1:12.2 | 9.0 s |
| Chorus | 4 | 1:21.1 | 17.9 s |
| Bridge | 2 | 1:39.1 | 9.0 s |
| Final chorus | 4 | 1:48.1 | 17.9 s |
The whole song is 28 eights. With this table you already know you need about 9 formation sections, and that choruses are where you change every 8.
Tip: Write the map before setting a single step. If you get the 1 wrong, everything else slides.
Counting finer: ‘and’ and ‘a’
Halfway between two counts is the ‘and’: 1 and 2 and 3 and. For even quicker steps you add ‘a’ before the count: 1 and a 2. That's how steps like a kick-ball-change (‘7 and 8’) or a triple step (‘1 a 2’) are written.
5-minute exercise
- Play a song you like and tap the pulse with your foot.
- When the drums come in, say ‘1’ out loud and count to 8, over and over.
- Check whether the chorus starts on your 1. If not, shift where you start.
- Count how many eights each section lasts and write it down.
Double time and half time
If a song feels slow but reads 140 BPM, it may be danced in half time (70). Count the way it's danced, not the way the number says.
In Choreo Studio
Type the BPM and where the first 1 lands (in seconds), and the timeline marks itself in eights. Every formation and transition snaps to the counts, and the +/− buttons change durations one count at a time.
Frequently asked questions
How do I find a song's BPM?
Tap along for 15 seconds, count the taps and multiply by 4. You can also look the song up on a BPM site or use a metronome with tap tempo.
Why count in 8 and not 4?
Because phrases in popular music last 8 counts (two bars of 4). Counting in eights makes step and formation changes line up with the phrases.
What does ‘and’ between counts mean?
It's the halfway point between two counts: ‘1 and 2 and’. It's used for quick steps, like a kick-ball-change on ‘7 and 8’.
What if the song changes tempo?
Split it into sections and count each one at its own BPM. In the app you can add markers where it changes.