Choreo Studio

Formation transitions: how to move between formations without collisions

A group routine looks professional or messy mostly because of its transitions. The steps can be simple, but if every formation change is clean, the audience sees a well-staged group.

What a transition is

It's the path each dancer travels from their spot in one formation to their spot in the next. Planning it means deciding who goes where, by which path and in how many counts.

Step 1: who goes to which spot

The most common mistake is keeping the same order of dancers in every formation. That forces someone to cross the whole stage. The rule that almost always works: give each dancer the nearest free spot in the next formation. Start with the dancers who have the fewest options (the ones on the edges) and finish with the center.

If someone needs to land on a specific spot (the soloist at center, for example), assign that first and place everyone else around it.

Step 2: how many counts

A practical reference for walking with control: 2 counts per metre (about 3 ft) at a medium tempo (100 to 120 BPM). If someone has to travel 4 metres, give at least 8 counts. If the path includes steps or turns, give more.

DistanceWalkingWith dance steps
1 to 2 m (3 to 6 ft)2 to 4 counts4 counts
2 to 4 m (6 to 13 ft)4 to 8 counts8 counts
4 to 6 m (13 to 20 ft)8 to 12 counts12 to 16 counts

How long each count lasts depends on the BPM; the table in how to count music in 8-counts gives you the exact seconds.

Step 3: the path

Five types of transition

  1. Direct. Everyone moves at once and arrives together. Orderly and easy to rehearse.
  2. Cascade. One dancer (or one row) leaves per count. Very showy on diagonals.
  3. Mirrored. The left and right sides travel symmetrical paths.
  4. By groups. One group moves while the other keeps dancing; then they switch.
  5. With a travelling step. Instead of walking, they cross with a step from the routine (a turn, a chassé). It takes more rehearsal but looks better.

When to start moving

If the new formation has to be set on 1, the travel starts earlier: usually on 5 or 7 of the previous 8. Whoever starts walking on 1 arrives late, and the formation looks half-made right when the phrase begins.

Tip: Rehearse transitions without steps, just walking and counting out loud. Once the paths are clean, add arms and style.

How to spot collisions before rehearsal

In Choreo Studio

When you apply a formation template, each dancer is assigned to the nearest spot. On the timeline you see every transition with its counts, you can lengthen or shorten it one count at a time and, on PRO, curve each dancer's path to avoid the others.

Keep reading

Frequently asked questions

How many counts does a transition need?

As a reference, about 2 counts per metre (3 ft) of walking at a medium tempo. A short change takes 4 counts; crossing half the stage needs 8 or more.

How do I stop dancers from colliding?

Give each dancer the nearest free spot in the next formation and check whether any paths cross. If they do, curve one of the paths or swap the spots.

On which count do I start moving?

Usually on 5 or 7 of the previous 8, so you land right on 1 of the new phrase.

Share this guide: WhatsApp Facebook X